Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Waterproof Composite Geotextile

Waterproof Composite Geotextile

A bonded waterproof composite geotextile for basement, roof and building waterproofing where a flexible membrane core is protected by fabric.

300g/1.0mm/300g; 400g/1.0mm; 500g/1.5mm/500g4-6 mBatch test reportExport packing
Waterproof Composite Geotextile produced by Hengyang

Representative photo of Waterproof Composite Geotextile; final surface, width and roll length are confirmed at order.

Specification

Standard range

Structure1F1M or 2F1M, fabric + HDPE membrane, factory bonded
Common build-ups300g/1.0mm/300g; 400g/1.0mm; 500g/1.5mm/500g
Width4-6 m
Hydrostatic resistance≥ 1.0 MPa with 1.0 mm membrane
StandardGB/T 17642-2008; basement work also references GB 50108

Typical production ranges for Waterproof Composite Geotextile; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Basement and roof waterproofing with a bonded membrane core. The material package around Waterproof Composite Geotextile — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Waterproof Composite Geotextile

  • Basement wall and floor waterproofing
  • Roof and podium waterproofing
  • Details where a torch-free membrane is preferred

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Waterproof Composite Geotextile compares

This product is positioned for building waterproofing, not for exposed landfill lining. For earthworks, specify a geosynthetic composite with the required puncture and seam performance.

Compare with my specification

Reference configuration

Jinan logistics warehouse floor containment — 1.0 mm HDPE under slab + drainage net. Reference configuration for Waterproof Composite Geotextile, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Fabric and HDPE membrane bonded at the factory for basement and water-retaining work.
  • Hydrostatic resistance ≥ 1.0 MPa with a 1.0 mm membrane.
  • Common builds include 300g/1.0mm/300g and 500g/1.5mm/500g.
Application fit

Where Waterproof Composite Geotextile fits

A bonded waterproof composite geotextile for basement, roof and building waterproofing where a flexible membrane core is protected by fabric.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Confirm the fabric weight, membrane thickness and total roll weight
  2. Lay with the membrane edge exposed for double-track welding
  3. Keep fabric edges clean and dry before welding
  4. Stitch or overlap fabric edges as specified, then protect the surface

Welding parameters and seam records for Waterproof Composite Geotextile are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Waterproof Composite Geotextile

Can it be used under a slab?

Yes, where the design specifies a bonded waterproof composite. The membrane must be continuous at laps and penetrations, and protected from construction damage.

When is composite geomembrane better than a plain liner?

Composite membrane protects the liner during installation and service, and adds filtration. It is widely used for canals, reservoirs and ponds where site conditions are less controlled.

What does 600g/1.5mm/600g mean?

It describes 600 g/m² geotextile on each face of a 1.5 mm geomembrane. Heavier fabric gives more puncture protection and tensile strength.

Can it be welded?

The membrane edge is exposed for double-track thermal welding; fabric edges are stitched or overlapped according to the installation method statement.

Related

Related products and engineering packages

Other products in the composite range, plus the eight material systems used around Waterproof Composite Geotextile.

Composite GeomembraneComposite Geomembrane

Composite Geomembrane

canals, reservoirs and ponds where lining and filtration are combined

Two-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

Two-Fabric One-Membrane Composite Geomembrane

reservoir and canal lining with 600g/1.5mm/600g typical build-up

One-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

One-Fabric One-Membrane Composite Geomembrane

channel lining and ponds where a lighter composite is specified

Anti-Seepage Composite GeotextileComposite Geomembrane

Anti-Seepage Composite Geotextile

fish ponds, reservoirs and small dams needing a flexible seepage barrier

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Waterproof Composite Geotextile for a project?

Send the specification values, area, head and delivery port for Waterproof Composite Geotextile; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products