A needle-punched nonwoven used as a filter, separator and cushion under geomembranes and in earthworks.

Representative photo of Nonwoven Geotextile; final surface, width and roll length are confirmed at order.
| Fibre | Polyester (PET) or polypropylene (PP) |
| Mass per unit area | 100-600 g/m² |
| Width | 1-6 m |
| Standard | GB/T 17638 |
| Functions | Filtration, separation, drainage, cushioning |
Typical production ranges for Nonwoven Geotextile; project values are confirmed against the drawing and test report before shipment.
Request data sheet & quoteFiltration, separation and cushioning under geomembranes. The material package around Nonwoven Geotextile — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.
The general nonwoven is selected by mass and tensile requirement. Filament grades give higher strength; staple-fibre grades are cost-effective for filtration and protection.
Compare with my specificationDezhou MSW landfill expansion, base liner — 1.5 mm HDPE geomembrane + GCL + 600 g/m² geotextile + drainage net. Reference configuration for Nonwoven Geotextile, not a delivered project record.
Reference configurations, not delivered project records.
A needle-punched nonwoven used as a filter, separator and cushion under geomembranes and in earthworks.
Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.
Welding parameters and seam records for Nonwoven Geotextile are supplied with the shipment; for the first production welds, an engineer can attend site.
A 500-600 g/m² nonwoven is common under HDPE on prepared subgrade. For light filtration and separation, 200-300 g/m² is often sufficient; check the design tensile and O95.
As a cushion under geomembrane, 500-600 g/m² is common; for drainage and filtration in normal earthworks 200-300 g/m² is usually sufficient. Check the design specification for tensile and permeability values.
Filament geotextile has higher tensile strength and better durability for reinforcement and heavy civil work. Staple fibre is cost-effective for filtration, separation and protection layers.
Yes. A 500-600 g/m² nonwoven geotextile is typically placed between the prepared subgrade and the geomembrane to prevent puncture and to provide drainage.
Other products in the geotextile range, plus the eight material systems used around Nonwoven Geotextile.
Nonwoven Geotextilereinforcement, heavy filtration and protection layers
Nonwoven Geotextilefiltration and drainage where polyester chemical resistance is needed
Nonwoven Geotextilealkali and acid resistant filtration in industrial and coastal works
Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.
Send the specification values, area, head and delivery port for Nonwoven Geotextile; we will confirm the standard and reply with a material schedule.