Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Studded HDPE Geomembrane

Studded HDPE Geomembrane

A studded HDPE surface that increases friction with soil cover and creates local drainage paths on slopes.

1.0 / 1.5 / 2.0 mm0.2-0.5 mm, regular patternBatch test reportExport packing
Studded HDPE Geomembrane produced by Hengyang

Representative photo of Studded HDPE Geomembrane; final surface, width and roll length are confirmed at order.

Specification

Standard range

MaterialHDPE with a regular studded surface
Thickness1.0 / 1.5 / 2.0 mm
Stud height0.2-0.5 mm, regular pattern
Interface friction≥ 0.3 against geotextile, about 40% above smooth sheet
Slope1:2.5 and steeper
StandardGB/T 17643-2011; stud height can be specified

Typical production ranges for Studded HDPE Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Slope lining where extra friction and drainage are required. The material package around Studded HDPE Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Studded HDPE Geomembrane

  • Landfill side slopes with soil cover
  • Steep embankment lining where cover stability matters
  • Slopes where surface water needs a controlled path

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Studded HDPE Geomembrane compares

Studded liner is a slope product, not a flat-floor default. On flat floors, smooth liner welds faster and is easier to test; specify studded only where friction or drainage is the driver.

Compare with my specification

Reference configuration

Dezhou MSW landfill expansion, base liner — 1.5 mm HDPE geomembrane + GCL + 600 g/m² geotextile + drainage net. Reference configuration for Studded HDPE Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • HDPE sheet with a regular 0.2-0.5 mm studded surface.
  • Interface friction ≥ 0.3 against geotextile, roughly 40% above smooth sheet.
  • Thickness 1.0-2.0 mm for slopes of 1:2.5 and steeper, including dam faces.
Application fit

Where Studded HDPE Geomembrane fits

A studded HDPE surface that increases friction with soil cover and creates local drainage paths on slopes.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the subgrade: no sharp stones, loose material or standing water
  2. Place the specified geotextile cushion and anchor the liner at the crest
  3. Trial-weld at the day's temperature, humidity and sheet thickness
  4. Air-test every seam, reinforce T-joints and record seam numbers

Welding parameters and seam records for Studded HDPE Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Studded HDPE Geomembrane

Does the stud pattern replace a drainage layer?

No. The studs improve friction and can help local drainage, but a designed drainage net or gravel layer is still required where flow capacity is specified.

What thickness should I use?

1.5 mm is the common main liner for municipal solid waste landfills; 1.0-1.5 mm for reservoirs and ponds; 0.5-1.0 mm for fish ponds. Design drawings and head conditions govern the final choice.

Smooth or textured?

Smooth liner for flat floors where welding quality is easy to control. Single or double textured liner for slopes steeper than 1:3, where friction and soil cover stability matter.

Is a test report supplied?

Yes. Each batch is tested for density, tensile properties, puncture and carbon black, and the report is issued with the shipment. Third-party retesting can be arranged.

Related

Related products and engineering packages

Other products in the geomembrane range, plus the eight material systems used around Studded HDPE Geomembrane.

HDPE GeomembraneHDPE Geomembrane

HDPE Geomembrane

the base liner for landfills, reservoirs, ponds and lagoons

HDPE Anti-Seepage MembraneHDPE Geomembrane

HDPE Anti-Seepage Membrane

a general seepage barrier for water ponds, fish ponds and liquid storage

LDPE GeomembraneHDPE Geomembrane

LDPE Geomembrane

flexible lining for small ponds, temporary covers and irregular shapes

LLDPE GeomembraneHDPE Geomembrane

LLDPE Geomembrane

a tear-resistant liner for settling ponds and agricultural water storage

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Studded HDPE Geomembrane for a project?

Send the specification values, area, head and delivery port for Studded HDPE Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products