Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/LLDPE Geomembrane

LLDPE Geomembrane

A middle-ground polyethylene liner with higher elongation and tear resistance than LDPE, suited to ponds and basins on less-than-perfect ground.

0.5 / 0.75 / 1.0 / 1.5 mm4-8 m width; 50-100 m rollBatch test reportExport packing
LLDPE Geomembrane produced by Hengyang

Representative LLDPE-lined reservoir under installation; LLDPE is supplied in 0.5-1.5 mm.

Specification

Standard range

MaterialLLDPE resin, density 0.92-0.94 g/cm³
Thickness0.5 / 0.75 / 1.0 / 1.5 mm
Width & roll length4-8 m width; 50-100 m roll
Tensile yield≥ 10 MPa
Elongation at break≥ 700%
Puncture resistance≥ 250 N at 1.0 mm
StandardProduced with reference to GB/T 17643
Typical useFish and shrimp ponds, channels, water storage, temporary covers

Typical production ranges for LLDPE Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

A tear-resistant liner for settling ponds and agricultural water storage. The material package around LLDPE Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for LLDPE Geomembrane

  • Fish and shrimp ponds with stone or compacted subgrade
  • Settling ponds and agricultural water storage
  • Sites where handling and conformability drive the choice

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How LLDPE Geomembrane compares

LLDPE is more forgiving than HDPE on uneven ground but lower in tensile strength. Choose HDPE when the liner is the primary long-service barrier; choose LLDPE when flexibility and tear resistance matter more.

Compare with my specification

Reference configuration

Yellow River Delta aquaculture pond renovation — 1.0 mm HDPE liner, 8 m width, 12 ponds. Reference configuration for LLDPE Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • LLDPE resin, density 0.92-0.94 g/cm³, combining flexibility with better tear resistance than LDPE.
  • Elongation at break ≥ 700% and puncture resistance ≥ 250 N at 1.0 mm.
  • Thickness 0.5-1.5 mm and width 4-8 m for fish ponds, channels and agricultural storage.
Application fit

Where LLDPE Geomembrane fits

A middle-ground polyethylene liner with higher elongation and tear resistance than LDPE, suited to ponds and basins on less-than-perfect ground.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the subgrade: no sharp stones, loose material or standing water
  2. Place the specified geotextile cushion and anchor the liner at the crest
  3. Trial-weld at the day's temperature, humidity and sheet thickness
  4. Air-test every seam, reinforce T-joints and record seam numbers

Welding parameters and seam records for LLDPE Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about LLDPE Geomembrane

LLDPE or HDPE for a shrimp pond?

LLDPE is common for ponds because it conforms to uneven bases and resists tearing. If the pond is part of a critical containment system or has high head, use HDPE.

What thickness is available in LLDPE?

LLDPE geomembrane is produced from 0.5 to 1.5 mm. Fish and shrimp ponds commonly use 0.5-1.0 mm; larger storage or exposed slopes may use 1.0-1.5 mm.

LLDPE or HDPE for a pond?

LLDPE offers higher elongation and tear resistance and is forgiving on uneven ground. HDPE gives higher strength and better long-term UV and stress-crack performance. For a lined pond with light traffic, LLDPE is often sufficient; for a primary containment liner, HDPE is preferred.

Is LLDPE resistant to environmental stress cracking?

LLDPE generally performs better than LDPE in wet and manure environments, but it is not a substitute for HDPE in critical containment. Confirm the resin grade and test values for the exposure.

Related

Related products and engineering packages

Other products in the geomembrane range, plus the eight material systems used around LLDPE Geomembrane.

HDPE GeomembraneHDPE Geomembrane

HDPE Geomembrane

the base liner for landfills, reservoirs, ponds and lagoons

HDPE Anti-Seepage MembraneHDPE Geomembrane

HDPE Anti-Seepage Membrane

a general seepage barrier for water ponds, fish ponds and liquid storage

LDPE GeomembraneHDPE Geomembrane

LDPE Geomembrane

flexible lining for small ponds, temporary covers and irregular shapes

Studded HDPE GeomembraneHDPE Geomembrane

Studded HDPE Geomembrane

slope lining where extra friction and drainage are required

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need LLDPE Geomembrane for a project?

Send the specification values, area, head and delivery port for LLDPE Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products