Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Staple Fibre Composite Geomembrane

Staple Fibre Composite Geomembrane

A staple-fibre composite for general canal, pond and reservoir lining where standard filtration and protection are sufficient.

400g/1.0mm/400g; 500g/1.0mm/500g; 600g/1.5mm/600gHDPE, 0.5-1.5 mmBatch test reportExport packing
Staple Fibre Composite Geomembrane produced by Hengyang

Representative photo of Staple Fibre Composite Geomembrane; final surface, width and roll length are confirmed at order.

Specification

Standard range

StructureStaple-fibre nonwoven fabric + HDPE membrane
Common build-ups400g/1.0mm/400g; 500g/1.0mm/500g; 600g/1.5mm/600g
MembraneHDPE, 0.5-1.5 mm
Tensile strength≥ 15 kN/m at 500g/1.0mm/500g
Width4-6 m
StandardGB/T 17642-2008 + GB/T 17638

Typical production ranges for Staple Fibre Composite Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

General water conservancy lining with staple-fibre fabric. The material package around Staple Fibre Composite Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Staple Fibre Composite Geomembrane

  • Irrigation canals and ditches
  • Farm ponds and small reservoirs
  • General water conservancy lining

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Staple Fibre Composite Geomembrane compares

Staple-fibre composite is cost-effective for general lining but lower in tensile than filament composite. Check the design values before substituting.

Compare with my specification

Reference configuration

Jining mining subsidence reservoir — 2F1M composite geomembrane + eco bag slope protection. Reference configuration for Staple Fibre Composite Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Staple-fibre nonwoven bonded to HDPE membrane, commonly 400g/1.0mm/400g.
  • Tensile strength ≥ 15 kN/m at 500g/1.0mm/500g.
  • A cost-effective build for ponds, channels, fish ponds and oxidation lagoons.
Application fit

Where Staple Fibre Composite Geomembrane fits

A staple-fibre composite for general canal, pond and reservoir lining where standard filtration and protection are sufficient.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Confirm the fabric weight, membrane thickness and total roll weight
  2. Lay with the membrane edge exposed for double-track welding
  3. Keep fabric edges clean and dry before welding
  4. Stitch or overlap fabric edges as specified, then protect the surface

Welding parameters and seam records for Staple Fibre Composite Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Staple Fibre Composite Geomembrane

Where is staple-fibre composite most economic?

On low-head canals, ponds and ditches with prepared subgrade and no heavy construction traffic. It becomes less suitable as head, slope or puncture demand increases.

When is composite geomembrane better than a plain liner?

Composite membrane protects the liner during installation and service, and adds filtration. It is widely used for canals, reservoirs and ponds where site conditions are less controlled.

What does 600g/1.5mm/600g mean?

It describes 600 g/m² geotextile on each face of a 1.5 mm geomembrane. Heavier fabric gives more puncture protection and tensile strength.

Can it be welded?

The membrane edge is exposed for double-track thermal welding; fabric edges are stitched or overlapped according to the installation method statement.

Related

Related products and engineering packages

Other products in the composite range, plus the eight material systems used around Staple Fibre Composite Geomembrane.

Composite GeomembraneComposite Geomembrane

Composite Geomembrane

canals, reservoirs and ponds where lining and filtration are combined

Two-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

Two-Fabric One-Membrane Composite Geomembrane

reservoir and canal lining with 600g/1.5mm/600g typical build-up

One-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

One-Fabric One-Membrane Composite Geomembrane

channel lining and ponds where a lighter composite is specified

Waterproof Composite GeotextileComposite Geomembrane

Waterproof Composite Geotextile

basement and roof waterproofing with a bonded membrane core

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Staple Fibre Composite Geomembrane for a project?

Send the specification values, area, head and delivery port for Staple Fibre Composite Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products