Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Smooth HDPE Geomembrane

Smooth HDPE Geomembrane

The smooth HDPE grade for flat floors, tank bases and pond bottoms where welding access and seam testing are straightforward.

0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mm2-10 m width; 50-100 m rollBatch test reportExport packing
Smooth HDPE Geomembrane produced by Hengyang

Representative photo of Smooth HDPE Geomembrane; final surface, width and roll length are confirmed at order.

Specification

Standard range

MaterialVirgin HDPE resin, density ≥ 0.940 g/cm³
Thickness0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mm
Width & roll length2-10 m width; 50-100 m roll
Tensile yield≥ 15 MPa at 1.5 mm, GB resin
Puncture resistance≥ 300 N at 1.5 mm
Permeability≤ 1×10⁻¹³ cm/s

Typical production ranges for Smooth HDPE Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Flat floors, tank bases and pond bottoms with easy welding access. The material package around Smooth HDPE Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Smooth HDPE Geomembrane

  • Tank farm floors and bund bases
  • Reservoir and pond bottoms
  • Pre-fabricated panels for regular geometry

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Smooth HDPE Geomembrane compares

Smooth surface gives the most reliable double-track weld and the easiest vacuum or air test. Use textured or studded grades only where slope friction is a real design requirement.

Compare with my specification

Reference configuration

Binhai petrochemical tank farm secondary containment — 2.0 mm double-textured HDPE + geotextile + leak detection. Reference configuration for Smooth HDPE Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Smooth HDPE surface gives the most consistent double-track weld and the easiest seam inspection.
  • Thickness 0.3-3.0 mm, width 2-10 m, tensile yield ≥ 15 MPa at 1.5 mm.
  • Best suited to cell floors, pond bottoms and large-radius curves rather than steep slopes.
Application fit

Where Smooth HDPE Geomembrane fits

The smooth HDPE grade for flat floors, tank bases and pond bottoms where welding access and seam testing are straightforward.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the subgrade: no sharp stones, loose material or standing water
  2. Place the specified geotextile cushion and anchor the liner at the crest
  3. Trial-weld at the day's temperature, humidity and sheet thickness
  4. Air-test every seam, reinforce T-joints and record seam numbers

Welding parameters and seam records for Smooth HDPE Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Smooth HDPE Geomembrane

Why choose smooth on a floor?

Smooth sheet welds consistently, allows tight seam testing and is easier to clean. Floor friction is usually provided by the subgrade and cover, not the liner surface.

What thickness should I use?

1.5 mm is the common main liner for municipal solid waste landfills; 1.0-1.5 mm for reservoirs and ponds; 0.5-1.0 mm for fish ponds. Design drawings and head conditions govern the final choice.

Smooth or textured?

Smooth liner for flat floors where welding quality is easy to control. Single or double textured liner for slopes steeper than 1:3, where friction and soil cover stability matter.

Is a test report supplied?

Yes. Each batch is tested for density, tensile properties, puncture and carbon black, and the report is issued with the shipment. Third-party retesting can be arranged.

Related

Related products and engineering packages

Other products in the geomembrane range, plus the eight material systems used around Smooth HDPE Geomembrane.

HDPE GeomembraneHDPE Geomembrane

HDPE Geomembrane

the base liner for landfills, reservoirs, ponds and lagoons

HDPE Anti-Seepage MembraneHDPE Geomembrane

HDPE Anti-Seepage Membrane

a general seepage barrier for water ponds, fish ponds and liquid storage

LDPE GeomembraneHDPE Geomembrane

LDPE Geomembrane

flexible lining for small ponds, temporary covers and irregular shapes

LLDPE GeomembraneHDPE Geomembrane

LLDPE Geomembrane

a tear-resistant liner for settling ponds and agricultural water storage

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Smooth HDPE Geomembrane for a project?

Send the specification values, area, head and delivery port for Smooth HDPE Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products