A GCL with a PE film facing to limit premature hydration on wet sites and to simplify vertical or blind-side installation.

Representative photo of Film-Faced Bentonite Blanket; final surface, width and roll length are confirmed at order.
| Structure | GCL + PE film, 0.2-0.5 mm film |
| Mass | 4500-6500 g/m² |
| Width & roll | 4-6 m width; 30 m roll |
| Permeability | ≤ 1×10⁻¹² cm/s |
| Seams | ≥ 150 mm lap; film heat-welded or adhesive-bonded |
| Standard | JG/T 194-2018; film to GB/T 17643 |
Typical production ranges for Film-Faced Bentonite Blanket; project values are confirmed against the drawing and test report before shipment.
Request data sheet & quoteWet sites and vertical walls where premature hydration must be controlled. The material package around Film-Faced Bentonite Blanket — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.
The film face reduces water ingress before installation but also limits hydration if the site is too dry. Use plain GCL where the base must hydrate from the soil.
Compare with my specificationBinzhou coal ash yard closure — GCL cap + 0.75 mm HDPE + soil cover. Reference configuration for Film-Faced Bentonite Blanket, not a delivered project record.
Reference configurations, not delivered project records.
A GCL with a PE film facing to limit premature hydration on wet sites and to simplify vertical or blind-side installation.
Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.
Welding parameters and seam records for Film-Faced Bentonite Blanket are supplied with the shipment; for the first production welds, an engineer can attend site.
Use it when rain, groundwater or wet subgrade could hydrate the bentonite before the panels are covered, or for vertical blind-side work where the blanket must stay dry until backfill.
GCL is often used for landfill closure caps, secondary containment and underground waterproofing where a self-healing, low-profile layer is an advantage.
The bentonite must hydrate to seal. Installation should avoid prolonged dry exposure; in wet conditions a film-faced GCL reduces premature hydration.
Rolls are overlapped 150-300 mm, seams are covered with bentonite granules, and the blanket is protected by soil or a geomembrane as designed.
Other products in the bentonite range, plus the eight material systems used around Film-Faced Bentonite Blanket.
Bentonite Waterproof Blanket (GCL)landfill caps, ponds and underground waterproofing
Bentonite Waterproof Blanket (GCL)landfill base and cap sealing where self-healing is valued
Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.
Send the specification values, area, head and delivery port for Film-Faced Bentonite Blanket; we will confirm the standard and reply with a material schedule.