Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Tunnel Waterproof Board

Tunnel Waterproof Board

A flexible waterproof board installed between the primary and secondary tunnel lining, with heat-welded seams and a geotextile buffer layer.

1.0 / 1.2 / 1.5 / 2.0 mm2-4 m; 2-3 m common for tunnel crownsBatch test reportExport packing
Tunnel Waterproof Board produced by Hengyang

Representative photo of Tunnel Waterproof Board; final surface, width and roll length are confirmed at order.

Specification

Standard range

MaterialEVA / PE / PVC / ECB, by design
Thickness1.0 / 1.2 / 1.5 / 2.0 mm
Width2-4 m; 2-3 m common for tunnel crowns
StandardGB/T 18173.1; railway tunnels also reference TB/T 3360.1
Tensile strength≥ 16 MPa (EVA 1.5 mm)
Elongation at break≥ 550%
AccessoriesGeotextile buffer layer, hot-melt washers, crawling welder, seam tester

Typical production ranges for Tunnel Waterproof Board; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Tunnel secondary lining and underground waterproofing. The material package around Tunnel Waterproof Board — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Tunnel Waterproof Board

  • Mined and shield tunnel secondary lining
  • Basement and underground retaining walls
  • Wet underground structures

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Tunnel Waterproof Board compares

EVA is flexible and easy to weld; HDPE gives higher chemical resistance. Select the material from groundwater chemistry, temperature and the specified test standard.

Compare with my specification

Reference configuration

Hefei metro tunnel waterproofing — 1.5 mm EVA waterproof board, hanger fixed. Reference configuration for Tunnel Waterproof Board, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • EVA, HDPE, PVC or ECB sheet selected by groundwater chemistry and design.
  • Thickness 1.0 / 1.2 / 1.5 / 2.0 mm and width 2-4 m.
  • Heat-welded seams with vacuum or air testing before the secondary lining.
Application fit

Where Tunnel Waterproof Board fits

A flexible waterproof board installed between the primary and secondary tunnel lining, with heat-welded seams and a geotextile buffer layer.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the primary lining profile and remove protruding bolts
  2. Install the geotextile buffer layer and fixing washers
  3. Weld longitudinal and circumferential seams with trial-tested parameters
  4. Vacuum-test seams and repair before the secondary lining

Welding parameters and seam records for Tunnel Waterproof Board are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Tunnel Waterproof Board

How are seams checked?

Seams are visually inspected and vacuum- or air-tested according to the tunnel specification. Results are recorded by seam number before the secondary lining.

EVA or HDPE board?

EVA is flexible and welds easily at low temperature, widely used in tunnels. HDPE has higher chemical resistance and is used where aggressive groundwater is expected.

How are seams tested?

Seams are inspected visually and with vacuum or air testing according to the tunnel waterproofing specification.

What is a hanger-type board?

A board with factory-fitted hangers that allow fast fixing to the primary lining before welding, improving installation speed and consistency.

Related

Related products and engineering packages

Other products in the waterproof board range, plus the eight material systems used around Tunnel Waterproof Board.

EVA Tunnel Waterproof BoardTunnel Waterproof Board

EVA Tunnel Waterproof Board

tunnel crowns and walls requiring flexible, easy-weld sheets

HDPE Tunnel Waterproof BoardTunnel Waterproof Board

HDPE Tunnel Waterproof Board

tunnels with aggressive groundwater and higher chemical resistance needs

Hanger-Type Tunnel Waterproof BoardTunnel Waterproof Board

Hanger-Type Tunnel Waterproof Board

fast fixing to primary lining in mined tunnels

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Tunnel Waterproof Board for a project?

Send the specification values, area, head and delivery port for Tunnel Waterproof Board; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products