Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Three-Dimensional Composite Drainage Net

Three-Dimensional Composite Drainage Net

A three-dimensional composite drainage core for landfill leachate layers, tunnel crowns and roof decks where a thin, high-flow layer is needed.

2-6 m width; 30-50 m roll≥ 1.0×10⁻³ m²/s at 8 mm and 200 kPaBatch test reportExport packing
Three-Dimensional Composite Drainage Net produced by Hengyang

Representative photo of Three-Dimensional Composite Drainage Net; final surface, width and roll length are confirmed at order.

Specification

Standard range

Core thickness5 / 6 / 8 mm
Width & roll2-6 m width; 30-50 m roll
Flow rate≥ 1.0×10⁻³ m²/s at 8 mm and 200 kPa
Compressive strength≥ 800 kPa at 8 mm
Geotextile200-300 g/m² on both faces
StandardWith reference to CJ/T 452 / GB/T 17638

Typical production ranges for Three-Dimensional Composite Drainage Net; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Landfill leachate layers, roof decks and tunnel drainage. The material package around Three-Dimensional Composite Drainage Net — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Three-Dimensional Composite Drainage Net

  • Landfill leachate collection and gas layers
  • Tunnel and basement wall drainage
  • Roof deck drainage

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Three-Dimensional Composite Drainage Net compares

The 3D core gives higher flow than a simple net at the same thickness. Confirm compressive load, flow requirement and filtration opening against the drainage design.

Compare with my specification

Reference configuration

Dezhou MSW landfill expansion, base liner — 1.5 mm HDPE geomembrane + GCL + 600 g/m² geotextile + drainage net. Reference configuration for Three-Dimensional Composite Drainage Net, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Three-dimensional HDPE core with geotextile on both faces, 5 / 6 / 8 mm.
  • Flow rate ≥ 1.0×10⁻³ m²/s at 8 mm under 200 kPa.
  • Compressive strength ≥ 800 kPa at 8 mm for basement roofs and leachate collection.
Application fit

Where Three-Dimensional Composite Drainage Net fits

A three-dimensional composite drainage core for landfill leachate layers, tunnel crowns and roof decks where a thin, high-flow layer is needed.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Confirm the flow requirement and compressive load
  2. Place the geotextile face against the soil or waste body
  3. Connect rolls with the specified overlap or coupling
  4. Protect outlets and sumps from silt and construction debris

Welding parameters and seam records for Three-Dimensional Composite Drainage Net are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Three-Dimensional Composite Drainage Net

Which direction does the water flow?

Flow runs along the geonet core to the outlet. The geotextile face must be placed against the soil or waste so fines are filtered before entering the core.

What is the advantage over gravel drainage?

A composite drainage net is thin, light and easy to install, and provides a predictable flow path while reducing excavation and haulage.

Which side faces the soil?

The geotextile side faces the soil or waste body; the geonet core faces the waterproofing layer or drainage outlet.

Can it replace a leachate collection layer?

It is used as a drainage layer within a designed system. Flow capacity, load and clogging potential must be checked against the leachate collection design.

Related

Related products and engineering packages

Other products in the drainage range, plus the eight material systems used around Three-Dimensional Composite Drainage Net.

Composite Drainage NetComposite Drainage Net

Composite Drainage Net

leachate collection, basement and retaining wall drainage

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Three-Dimensional Composite Drainage Net for a project?

Send the specification values, area, head and delivery port for Three-Dimensional Composite Drainage Net; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products