Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/HDPE Geomembrane

HDPE Geomembrane

The default primary liner when the project needs a long-service seepage barrier with known tensile, puncture and stress-crack performance.

0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mm2-10 m width; 50-100 m rollBatch test reportExport packing
HDPE Geomembrane produced by Hengyang

Representative HDPE geomembrane roll. Surface, width and roll length are confirmed at order.

Specification

Standard range

MaterialVirgin HDPE resin, density ≥ 0.940 g/cm³
Thickness0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mm
Width & roll length2-10 m width; 50-100 m roll
SurfaceSmooth, single/double textured, studded
StandardGB/T 17643-2011; landfill liner per CJ/T 234-2006
ColourBlack standard; green / blue on request
Key dataTensile yield ≥ 15 MPa (1.5 mm); puncture ≥ 300 N; permeability ≤ 1×10⁻¹³ cm/s

Typical production ranges for HDPE Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

The base liner for landfills, reservoirs, ponds and lagoons. The material package around HDPE Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for HDPE Geomembrane

  • Municipal solid waste landfill base and side slopes
  • Reservoir, lagoon and tank-farm primary lining
  • Cover systems where UV exposure is controlled

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How HDPE Geomembrane compares

Compared with LDPE and LLDPE, HDPE gives higher tensile strength and better long-term stress-crack resistance. Use it where the liner is the primary barrier, not a detail or temporary cover.

Compare with my specification

Reference configuration

Dezhou MSW landfill expansion, base liner — 1.5 mm HDPE geomembrane + GCL + 600 g/m² geotextile + drainage net. Reference configuration for HDPE Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Virgin HDPE resin with density ≥ 0.940 g/cm³ and controlled carbon black and OIT.
  • Thickness from 0.3 to 3.0 mm and roll width up to 10 m, so large cells need fewer field seams.
  • Smooth, textured and studded surfaces are available for floors, slopes and anchorage.
Application fit

Where HDPE Geomembrane fits

The default primary liner when the project needs a long-service seepage barrier with known tensile, puncture and stress-crack performance.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the subgrade: no sharp stones, loose material or standing water
  2. Place the specified geotextile cushion and anchor the liner at the crest
  3. Trial-weld at the day's temperature, humidity and sheet thickness
  4. Air-test every seam, reinforce T-joints and record seam numbers

Welding parameters and seam records for HDPE Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about HDPE Geomembrane

Why is 1.5 mm the common landfill thickness?

1.5 mm balances puncture resistance, welding reliability and cost for a municipal landfill base. Hazardous waste and high-load sites often move to 2.0 mm; the design drawing governs.

What thickness should I use?

1.5 mm is the common main liner for municipal solid waste landfills; 1.0-1.5 mm for reservoirs and ponds; 0.5-1.0 mm for fish ponds. Design drawings and head conditions govern the final choice.

Smooth or textured?

Smooth liner for flat floors where welding quality is easy to control. Single or double textured liner for slopes steeper than 1:3, where friction and soil cover stability matter.

Is a test report supplied?

Yes. Each batch is tested for density, tensile properties, puncture and carbon black, and the report is issued with the shipment. Third-party retesting can be arranged.

Related

Related products and engineering packages

Other products in the geomembrane range, plus the eight material systems used around HDPE Geomembrane.

HDPE Anti-Seepage MembraneHDPE Geomembrane

HDPE Anti-Seepage Membrane

a general seepage barrier for water ponds, fish ponds and liquid storage

LDPE GeomembraneHDPE Geomembrane

LDPE Geomembrane

flexible lining for small ponds, temporary covers and irregular shapes

LLDPE GeomembraneHDPE Geomembrane

LLDPE Geomembrane

a tear-resistant liner for settling ponds and agricultural water storage

Studded HDPE GeomembraneHDPE Geomembrane

Studded HDPE Geomembrane

slope lining where extra friction and drainage are required

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need HDPE Geomembrane for a project?

Send the specification values, area, head and delivery port for HDPE Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products