Polyester nonwoven selected where filtration and drainage are needed in contact with fine soils and moderate chemical exposure.

Representative photo of Polyester Geotextile; final surface, width and roll length are confirmed at order.
| Fibre | Polyester (PET), continuous or staple |
| Mass per unit area | 100-800 g/m² |
| Width | 1-6 m |
| Service temperature | -40 °C to 120 °C |
| Chemical resistance | Weak acids; not for long-term strong alkali immersion |
| Standard | GB/T 17638 / GB/T 17639 |
Typical production ranges for Polyester Geotextile; project values are confirmed against the drawing and test report before shipment.
Request data sheet & quoteFiltration and drainage where polyester chemical resistance is needed. The material package around Polyester Geotextile — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.
Polyester is strong and widely used, but is sensitive to strong alkalis at high temperature. For high-alkali or aggressive industrial exposure, check polypropylene instead.
Compare with my specificationWeifang industrial wastewater equalisation basin — 1.5 mm HDPE liner + chemical-resistant geotextile. Reference configuration for Polyester Geotextile, not a delivered project record.
Reference configurations, not delivered project records.
Polyester nonwoven selected where filtration and drainage are needed in contact with fine soils and moderate chemical exposure.
Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.
Welding parameters and seam records for Polyester Geotextile are supplied with the shipment; for the first production welds, an engineer can attend site.
Fresh concrete can be alkaline. Polyester is commonly used in normal drainage and filtration, but for aggressive or hot alkaline exposure confirm the fibre with the design.
As a cushion under geomembrane, 500-600 g/m² is common; for drainage and filtration in normal earthworks 200-300 g/m² is usually sufficient. Check the design specification for tensile and permeability values.
Filament geotextile has higher tensile strength and better durability for reinforcement and heavy civil work. Staple fibre is cost-effective for filtration, separation and protection layers.
Yes. A 500-600 g/m² nonwoven geotextile is typically placed between the prepared subgrade and the geomembrane to prevent puncture and to provide drainage.
Other products in the geotextile range, plus the eight material systems used around Polyester Geotextile.
Nonwoven Geotextilereinforcement, heavy filtration and protection layers
Nonwoven Geotextilealkali and acid resistant filtration in industrial and coastal works
Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.
Send the specification values, area, head and delivery port for Polyester Geotextile; we will confirm the standard and reply with a material schedule.