Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Hanger-Type Tunnel Waterproof Board

Hanger-Type Tunnel Waterproof Board

A waterproof board with factory-fitted hangers for fast, consistent fixing to the primary lining before seam welding.

EVA or HDPE1.0 / 1.2 / 1.5 / 2.0 mmBatch test reportExport packing
Hanger-Type Tunnel Waterproof Board produced by Hengyang

Representative photo of Hanger-Type Tunnel Waterproof Board; final surface, width and roll length are confirmed at order.

Specification

Standard range

StructureWaterproof board with pre-bonded hanger straps at 0.5-1.0 m spacing
MaterialEVA or HDPE
Thickness1.0 / 1.2 / 1.5 / 2.0 mm
Width & roll2-4 m width; 20-30 m roll
Strap tensile≥ 8 kN per strap
StandardGB/T 18173.1

Typical production ranges for Hanger-Type Tunnel Waterproof Board; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Fast fixing to primary lining in mined tunnels. The material package around Hanger-Type Tunnel Waterproof Board — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Hanger-Type Tunnel Waterproof Board

  • Mined tunnels with shotcrete primary lining
  • Large tunnel crowns
  • Projects where installation speed drives the programme

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Hanger-Type Tunnel Waterproof Board compares

Hanger fixing speeds installation and controls spacing, but the hanger pattern must match the lining. Standard board with adhesive or washer fixing is used where hangers are not specified.

Compare with my specification

Reference configuration

Hefei metro tunnel waterproofing — 1.5 mm EVA waterproof board, hanger fixed. Reference configuration for Hanger-Type Tunnel Waterproof Board, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Waterproof board with pre-bonded hanger straps at 0.5-1.0 m spacing.
  • Strap tensile ≥ 8 kN, so the board can be hung directly from the primary lining.
  • EVA or HDPE, 1.0-2.0 mm, for large-section tunnels and cut-and-cover walls.
Application fit

Where Hanger-Type Tunnel Waterproof Board fits

A waterproof board with factory-fitted hangers for fast, consistent fixing to the primary lining before seam welding.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the primary lining profile and remove protruding bolts
  2. Install the geotextile buffer layer and fixing washers
  3. Weld longitudinal and circumferential seams with trial-tested parameters
  4. Vacuum-test seams and repair before the secondary lining

Welding parameters and seam records for Hanger-Type Tunnel Waterproof Board are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Hanger-Type Tunnel Waterproof Board

What is the advantage of hanger fixing?

Hangers hold the board at a consistent spacing, reduce manual support and allow welding to proceed in a planned sequence. The fixing pattern is confirmed against the primary lining survey.

EVA or HDPE board?

EVA is flexible and welds easily at low temperature, widely used in tunnels. HDPE has higher chemical resistance and is used where aggressive groundwater is expected.

How are seams tested?

Seams are inspected visually and with vacuum or air testing according to the tunnel waterproofing specification.

What is a hanger-type board?

A board with factory-fitted hangers that allow fast fixing to the primary lining before welding, improving installation speed and consistency.

Related

Related products and engineering packages

Other products in the waterproof board range, plus the eight material systems used around Hanger-Type Tunnel Waterproof Board.

Tunnel Waterproof BoardTunnel Waterproof Board

Tunnel Waterproof Board

tunnel secondary lining and underground waterproofing

EVA Tunnel Waterproof BoardTunnel Waterproof Board

EVA Tunnel Waterproof Board

tunnel crowns and walls requiring flexible, easy-weld sheets

HDPE Tunnel Waterproof BoardTunnel Waterproof Board

HDPE Tunnel Waterproof Board

tunnels with aggressive groundwater and higher chemical resistance needs

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Hanger-Type Tunnel Waterproof Board for a project?

Send the specification values, area, head and delivery port for Hanger-Type Tunnel Waterproof Board; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products