Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Filament Composite Geomembrane

Filament Composite Geomembrane

A composite using filament geotextile for canals and reservoirs where higher tensile and puncture resistance are specified.

600g/1.5mm/600g; 500g/1.0mm/500gVirgin HDPE, 1.0-2.0 mmBatch test reportExport packing
Filament Composite Geomembrane produced by Hengyang

Representative photo of Filament Composite Geomembrane; final surface, width and roll length are confirmed at order.

Specification

Standard range

StructureFilament nonwoven fabric + HDPE membrane, 2F1M
Common build-ups600g/1.5mm/600g; 500g/1.0mm/500g
MembraneVirgin HDPE, 1.0-2.0 mm
Tensile strength≥ 25 kN/m at 600g/1.5mm/600g
CBR puncture≥ 3.0 kN
StandardGB/T 17642-2008 + GB/T 17639

Typical production ranges for Filament Composite Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

High-strength canal and reservoir lining with filament fabric. The material package around Filament Composite Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Filament Composite Geomembrane

  • High-flow canals
  • Reservoir slopes with coarse fill
  • Lining subject to construction traffic

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Filament Composite Geomembrane compares

Filament composite gives higher strength than staple-fibre composite at the same mass. Use it where the design tensile or puncture value cannot be met by staple fibre.

Compare with my specification

Reference configuration

Jining mining subsidence reservoir — 2F1M composite geomembrane + eco bag slope protection. Reference configuration for Filament Composite Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Filament nonwoven fabric bonded to HDPE membrane for high-stress containment.
  • Tensile strength ≥ 25 kN/m and CBR puncture ≥ 3.0 kN at 600g/1.5mm/600g.
  • Used for landfill caps, tailings dams, reservoirs and embankments.
Application fit

Where Filament Composite Geomembrane fits

A composite using filament geotextile for canals and reservoirs where higher tensile and puncture resistance are specified.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Confirm the fabric weight, membrane thickness and total roll weight
  2. Lay with the membrane edge exposed for double-track welding
  3. Keep fabric edges clean and dry before welding
  4. Stitch or overlap fabric edges as specified, then protect the surface

Welding parameters and seam records for Filament Composite Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Filament Composite Geomembrane

Filament or staple composite?

Choose filament where high tensile, puncture or creep demand is specified. Staple fibre composite is suitable for general water conservancy lining when its test values meet the design.

When is composite geomembrane better than a plain liner?

Composite membrane protects the liner during installation and service, and adds filtration. It is widely used for canals, reservoirs and ponds where site conditions are less controlled.

What does 600g/1.5mm/600g mean?

It describes 600 g/m² geotextile on each face of a 1.5 mm geomembrane. Heavier fabric gives more puncture protection and tensile strength.

Can it be welded?

The membrane edge is exposed for double-track thermal welding; fabric edges are stitched or overlapped according to the installation method statement.

Related

Related products and engineering packages

Other products in the composite range, plus the eight material systems used around Filament Composite Geomembrane.

Composite GeomembraneComposite Geomembrane

Composite Geomembrane

canals, reservoirs and ponds where lining and filtration are combined

Two-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

Two-Fabric One-Membrane Composite Geomembrane

reservoir and canal lining with 600g/1.5mm/600g typical build-up

One-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

One-Fabric One-Membrane Composite Geomembrane

channel lining and ponds where a lighter composite is specified

Waterproof Composite GeotextileComposite Geomembrane

Waterproof Composite Geotextile

basement and roof waterproofing with a bonded membrane core

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Filament Composite Geomembrane for a project?

Send the specification values, area, head and delivery port for Filament Composite Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products