Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Textured HDPE Geomembrane

Textured HDPE Geomembrane

A single- or double-textured HDPE liner for slopes steeper than about 1:3, where soil cover or geotextile friction governs stability.

1.0 / 1.5 / 2.0 mm0.25-0.75 mm, sprayed or embossedBatch test reportExport packing
Textured HDPE Geomembrane produced by Hengyang

Representative photo of Textured HDPE Geomembrane; final surface, width and roll length are confirmed at order.

Specification

Standard range

TypeSingle-textured (one smooth face) or double-textured
Thickness1.0 / 1.5 / 2.0 mm
Texture height0.25-0.75 mm, sprayed or embossed
Interface friction≥ 0.4 for double-textured against geotextile
Typical slope1:1.5 to 1:3
StandardGB/T 17643-2011; landfills also reference CJ/T 234-2006

Typical production ranges for Textured HDPE Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Steep slope lining and landfill side slopes that need grip. The material package around Textured HDPE Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Textured HDPE Geomembrane

  • Landfill and tailings side slopes
  • Steep reservoir and canal banks
  • Cover systems on slopes with geotextile or soil

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Textured HDPE Geomembrane compares

Textured liner raises interface friction; smooth liner is still preferred on flat floors because it is easier to weld and test. Double-textured is used where both faces need grip.

Compare with my specification

Reference configuration

Binhai petrochemical tank farm secondary containment — 2.0 mm double-textured HDPE + geotextile + leak detection. Reference configuration for Textured HDPE Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Single-textured or double-textured HDPE with a 0.25-0.75 mm sprayed or embossed surface.
  • Interface friction ≥ 0.4 for double-textured sheet against geotextile.
  • Thickness 1.0-2.0 mm for slopes from 1:1.5 to 1:3, including landfill side slopes.
Application fit

Where Textured HDPE Geomembrane fits

A single- or double-textured HDPE liner for slopes steeper than about 1:3, where soil cover or geotextile friction governs stability.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the subgrade: no sharp stones, loose material or standing water
  2. Place the specified geotextile cushion and anchor the liner at the crest
  3. Trial-weld at the day's temperature, humidity and sheet thickness
  4. Air-test every seam, reinforce T-joints and record seam numbers

Welding parameters and seam records for Textured HDPE Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Textured HDPE Geomembrane

Single- or double-textured?

Single-textured is used where only the cover side needs friction. Double-textured is used where both the subgrade and cover interfaces are critical, such as steep landfill slopes.

What thickness should I use?

1.5 mm is the common main liner for municipal solid waste landfills; 1.0-1.5 mm for reservoirs and ponds; 0.5-1.0 mm for fish ponds. Design drawings and head conditions govern the final choice.

Smooth or textured?

Smooth liner for flat floors where welding quality is easy to control. Single or double textured liner for slopes steeper than 1:3, where friction and soil cover stability matter.

Is a test report supplied?

Yes. Each batch is tested for density, tensile properties, puncture and carbon black, and the report is issued with the shipment. Third-party retesting can be arranged.

Related

Related products and engineering packages

Other products in the geomembrane range, plus the eight material systems used around Textured HDPE Geomembrane.

HDPE GeomembraneHDPE Geomembrane

HDPE Geomembrane

the base liner for landfills, reservoirs, ponds and lagoons

HDPE Anti-Seepage MembraneHDPE Geomembrane

HDPE Anti-Seepage Membrane

a general seepage barrier for water ponds, fish ponds and liquid storage

LDPE GeomembraneHDPE Geomembrane

LDPE Geomembrane

flexible lining for small ponds, temporary covers and irregular shapes

LLDPE GeomembraneHDPE Geomembrane

LLDPE Geomembrane

a tear-resistant liner for settling ponds and agricultural water storage

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Textured HDPE Geomembrane for a project?

Send the specification values, area, head and delivery port for Textured HDPE Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products