Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/LDPE Geomembrane

LDPE Geomembrane

A softer polyethylene liner for irregular small ponds, temporary covers and details where conformability matters more than high tensile strength.

0.3 / 0.4 / 0.5 / 0.75 / 1.0 mm2-8 m width; 50-100 m rollBatch test reportExport packing
LDPE Geomembrane produced by Hengyang

Representative LDPE-lined storage basin; LDPE is supplied in 0.3-1.0 mm and is visually similar to HDPE in black.

Specification

Standard range

MaterialLDPE resin, density 0.91-0.93 g/cm³
Thickness0.3 / 0.4 / 0.5 / 0.75 / 1.0 mm
Width & roll length2-8 m width; 50-100 m roll
Elongation at break≥ 600%; more flexible than HDPE
StandardProduced with reference to GB/T 17643; project values can be specified
Service temperature-30 °C to 60 °C; low-temperature flexibility
ColourBlack, green or blue; cut-to-size available

Typical production ranges for LDPE Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Flexible lining for small ponds, temporary covers and irregular shapes. The material package around LDPE Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for LDPE Geomembrane

  • Garden and landscape ponds with complex shapes
  • Temporary covers and small agricultural basins
  • Pipe boots and local detailing where flexibility helps

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How LDPE Geomembrane compares

LDPE is more flexible than HDPE but has lower strength and weaker UV and puncture resistance. It is not a substitute for HDPE in a landfill or long-service primary liner.

Compare with my specification

Reference configuration

Qingdao landscape lake waterproofing — 1.0 mm HDPE liner + composite membrane shoreline. Reference configuration for LDPE Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • LDPE resin, density 0.91-0.93 g/cm³, with elongation at break of at least 600%.
  • Thickness 0.3-1.0 mm and width 2-8 m for small, irregular and heavily detailed basins.
  • Lower tensile and stress-crack resistance than HDPE, so it is not a landfill primary liner.
Application fit

Where LDPE Geomembrane fits

A softer polyethylene liner for irregular small ponds, temporary covers and details where conformability matters more than high tensile strength.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Accept the subgrade: no sharp stones, loose material or standing water
  2. Place the specified geotextile cushion and anchor the liner at the crest
  3. Trial-weld at the day's temperature, humidity and sheet thickness
  4. Air-test every seam, reinforce T-joints and record seam numbers

Welding parameters and seam records for LDPE Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about LDPE Geomembrane

Can LDPE be used on a landfill?

No. LDPE has lower tensile strength and stress-crack resistance than HDPE. For landfill, tailings or a long-service primary barrier, specify HDPE.

What thickness is available in LDPE?

LDPE geomembrane is produced from 0.3 to 1.0 mm. For ponds and small reservoirs, 0.5-1.0 mm is typical; the design head and subgrade determine the final value.

Can LDPE replace HDPE in a landfill?

No. LDPE has lower tensile strength and weaker UV and puncture resistance than HDPE. For landfill, tailings and long-service primary liners, specify HDPE; use LDPE for flexible detailing, temporary covers and small ponds.

How is LDPE joined?

It can be heat-welded or adhesively bonded, depending on thickness and site conditions. Trial joints and peel checks are required before production work, especially at low temperature.

Related

Related products and engineering packages

Other products in the geomembrane range, plus the eight material systems used around LDPE Geomembrane.

HDPE GeomembraneHDPE Geomembrane

HDPE Geomembrane

the base liner for landfills, reservoirs, ponds and lagoons

HDPE Anti-Seepage MembraneHDPE Geomembrane

HDPE Anti-Seepage Membrane

a general seepage barrier for water ponds, fish ponds and liquid storage

LLDPE GeomembraneHDPE Geomembrane

LLDPE Geomembrane

a tear-resistant liner for settling ponds and agricultural water storage

Studded HDPE GeomembraneHDPE Geomembrane

Studded HDPE Geomembrane

slope lining where extra friction and drainage are required

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need LDPE Geomembrane for a project?

Send the specification values, area, head and delivery port for LDPE Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products