Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Factory

Factory, production lines and quality control

Production and testing sit on the same site in Lingcheng, Dezhou. That shortens the loop between a batch and its test result, and lets buyers see the line their material runs on.

5 production lines12 QC test typesWidth up to 10 mVisits by appointment
Production

Five lines under one roof

Geomembrane, geotextile, GCL, drainage and finishing are coordinated on one site, so a project package can be produced and packed together.

Line 1

Blown-film geomembrane line

HDPE membrane from 0.3 to 3.0 mm, width up to 10 m; smooth and textured surfaces.

Line 2

Calendered HDPE line

Textured and studded HDPE for slopes, tank bunds and anchorage zones.

Line 3

Nonwoven lines

Filament spun-bond and staple-fibre needle-punch geotextile from 100 to 800 g/m².

Line 4

GCL and drainage lines

Needle-punched sodium bentonite blanket and three-dimensional drainage net.

Line 5

Finishing and packing

Slitting, roll labelling, palletising and container loading with UV cover and desiccant.

Factory site

Factory gate, production line, warehouse and laboratory

The plant sits in Lingcheng Economic Development Zone, Dezhou, next to the 104 national road and the Beijing–Shanghai expressway and high-speed rail. The images show the gate, testing laboratory and finished goods area; visits can be arranged to see the line and retained samples.

Blown-film geomembrane line

Blown-film geomembrane line

HDPE membrane from 0.3 to 3.0 mm, width up to 10 m.

Calendered HDPE line

Calendered HDPE line

Textured and studded membrane for slope friction.

Nonwoven lines

Nonwoven lines

Filament and staple-fibre geotextile from 100 to 800 g/m².

GCL production

GCL production

Needle-punched sodium bentonite blanket.

Drainage net line

Drainage net line

Three-dimensional geonet with filtration fabric.

Quality laboratory

Quality laboratory

Tensile, puncture, permeability, carbon black and OIT testing.

Tensile testing

Tensile testing

Every batch checked against the declared standard.

Permeability testing

Permeability testing

Flexible-wall permeameter for liner permeability.

Finished warehouse

Finished warehouse

Rolls labelled and staged for container loading.

What we test before shipment

StageControl
Incoming resinDensity, melt index and carbon black are checked against the approved formulation.
In-processThickness, width and surface are measured continuously; roll weight is recorded.
Finished productTensile, puncture, permeability, carbon black and OIT are tested per batch.
Retention samplesA retained sample from each batch is kept for traceability and third-party comparison.
Pre-shipmentPacking, labels, quantity and loading photos are checked before the container is sealed.
Service capability

From data sheet to site support

  • Material selection and layer build-up review against the drawing
  • Batch test reports, welding parameters and seam-testing forms
  • Pre-fabrication, custom slit widths and panel labelling
  • Export packing, loading photos and customs documents
  • Engineer attendance for critical first welds and seam review
  • Retained batch samples for third-party comparison
Book a factory visit

Visits are arranged on weekdays. We can show the line, laboratory, retained samples and finished goods before a supplier audit.

Arrange a visit

From sampling to retained sample

Each production batch is sampled at the line, tested against the declared standard and linked to a retained sample. The retained sample stays with the batch record so a later dispute can be checked against the material actually shipped, not a separate sample made for presentation.

1. Incoming resin

Density, melt index and carbon black are checked against the approved formulation before production.

2. In-process

Thickness, width and surface are measured continuously; roll weight and line settings are recorded.

3. Finished batch

Tensile, puncture, permeability and carbon black are tested; the report is linked to the roll labels.

Retained samples are kept for traceability and third-party comparison. Pre-shipment checks cover packing, labels, quantity and loading photos before the container is sealed.

Send your project parameters, get a material schedule and quote

Drawings, head, area and chemical exposure are enough for a first selection. We reply within one working day.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products