Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Continuous Filament Geotextile

Continuous Filament Geotextile

Continuous-filament geotextile for reinforcement, heavy filtration and protection layers where tensile strength and creep behaviour matter.

100 / 150 / 200 / 300 / 400 / 500 / 600 / 800 g/m²1-6 m width; 4-6 m commonBatch test reportExport packing
Continuous Filament Geotextile produced by Hengyang

Representative photo of Continuous Filament Geotextile; final surface, width and roll length are confirmed at order.

Specification

Standard range

FibrePolyester (PET) continuous filament, spun-bonded and needle-punched
Mass per unit area100 / 150 / 200 / 300 / 400 / 500 / 600 / 800 g/m²
Width & roll length1-6 m width; 4-6 m common
Tensile strength≥ 15 kN/m (400 g/m², machine direction, typical)
O95 pore size0.07-0.2 mm, adjusted by mass
StandardGB/T 17639-2023
FunctionsFiltration, separation, drainage, reinforcement, membrane protection

Typical production ranges for Continuous Filament Geotextile; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Reinforcement, heavy filtration and protection layers. The material package around Continuous Filament Geotextile — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Continuous Filament Geotextile

  • Reinforcement of steep slopes and embankments
  • Protection layer under heavy geomembrane cover
  • Filtration in high-flow or high-load drainage

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Continuous Filament Geotextile compares

Filament geotextile has higher tensile strength and better long-term creep performance than staple fibre. Use it where the design specifies reinforcement or high puncture demand.

Compare with my specification

Reference configuration

Linyi tailings dam starter lining — 1.5 mm HDPE + 600 g/m² geotextile. Reference configuration for Continuous Filament Geotextile, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Continuous filament polyester, spun-bonded and needle-punched, 100-800 g/m².
  • Higher tensile strength and CBR puncture resistance than staple-fibre fabric at equal mass.
  • Used for landfill cushions, steep slope reinforcement and heavy filtration.
Application fit

Where Continuous Filament Geotextile fits

Continuous-filament geotextile for reinforcement, heavy filtration and protection layers where tensile strength and creep behaviour matter.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Check the specified mass, tensile and O95 values against the drawing
  2. Prepare a smooth subgrade and remove sharp objects
  3. Lap 300 mm minimum, or 500 mm in water and scour zones
  4. Protect exposed rolls from UV and wind uplift before covering

Welding parameters and seam records for Continuous Filament Geotextile are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Continuous Filament Geotextile

Filament or staple for a landfill cushion?

Filament is preferred where high puncture and tensile demand are specified. Staple fibre can be used for lighter cushion and filtration duties if the design values are met.

Which gram weight do I need?

As a cushion under geomembrane, 500-600 g/m² is common; for drainage and filtration in normal earthworks 200-300 g/m² is usually sufficient. Check the design specification for tensile and permeability values.

Filament or staple fibre?

Filament geotextile has higher tensile strength and better durability for reinforcement and heavy civil work. Staple fibre is cost-effective for filtration, separation and protection layers.

Can it be used under HDPE liner?

Yes. A 500-600 g/m² nonwoven geotextile is typically placed between the prepared subgrade and the geomembrane to prevent puncture and to provide drainage.

Related

Related products and engineering packages

Other products in the geotextile range, plus the eight material systems used around Continuous Filament Geotextile.

Nonwoven GeotextileNonwoven Geotextile

Nonwoven Geotextile

filtration, separation and cushioning under geomembranes

Staple Fibre GeotextileNonwoven Geotextile

Staple Fibre Geotextile

cost-effective filtration and separation in earthworks

Polyester GeotextileNonwoven Geotextile

Polyester Geotextile

filtration and drainage where polyester chemical resistance is needed

Polypropylene GeotextileNonwoven Geotextile

Polypropylene Geotextile

alkali and acid resistant filtration in industrial and coastal works

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Continuous Filament Geotextile for a project?

Send the specification values, area, head and delivery port for Continuous Filament Geotextile; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products