A commercial HDPE liner specification positioned for ponds, reservoirs and general liquid storage rather than landfill certification.

Representative polyethylene liner installed in a water storage basin.
| Material | Virgin HDPE resin, density ≥ 0.940 g/cm³ |
| Thickness | 0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mm |
| Width & roll length | 2-10 m width; 50-100 m roll |
| Standard | GB/T 17643-2011 |
| Typical use | General water containment where landfill-grade documentation is not required |
Typical production ranges for HDPE Anti-Seepage Membrane; project values are confirmed against the drawing and test report before shipment.
Request data sheet & quoteA general seepage barrier for water ponds, fish ponds and liquid storage. The material package around HDPE Anti-Seepage Membrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.
It uses the same HDPE base sheet as the landfill liner, but the quotation is built around water-storage thickness and width rather than landfill QA clauses. Do not use it to replace a specified landfill liner without written approval.
Compare with my specificationJining mining subsidence reservoir — 2F1M composite geomembrane + eco bag slope protection. Reference configuration for HDPE Anti-Seepage Membrane, not a delivered project record.
Reference configurations, not delivered project records.
A commercial HDPE liner specification positioned for ponds, reservoirs and general liquid storage rather than landfill certification.
Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.
Welding parameters and seam records for HDPE Anti-Seepage Membrane are supplied with the shipment; for the first production welds, an engineer can attend site.
The base polymer is HDPE. The difference is the specification package and typical thickness: water storage commonly uses 1.0-1.5 mm, while landfill base liners commonly use 1.5-2.0 mm with landfill QA records.
1.5 mm is the common main liner for municipal solid waste landfills; 1.0-1.5 mm for reservoirs and ponds; 0.5-1.0 mm for fish ponds. Design drawings and head conditions govern the final choice.
Smooth liner for flat floors where welding quality is easy to control. Single or double textured liner for slopes steeper than 1:3, where friction and soil cover stability matter.
Yes. Each batch is tested for density, tensile properties, puncture and carbon black, and the report is issued with the shipment. Third-party retesting can be arranged.
Other products in the geomembrane range, plus the eight material systems used around HDPE Anti-Seepage Membrane.
HDPE Geomembraneflexible lining for small ponds, temporary covers and irregular shapes
HDPE Geomembranea tear-resistant liner for settling ponds and agricultural water storage
Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.
Send the specification values, area, head and delivery port for HDPE Anti-Seepage Membrane; we will confirm the standard and reply with a material schedule.