Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Composite Geomembrane

Composite Geomembrane

A factory-bonded composite of geomembrane and nonwoven geotextile, combining seepage control with cushioning and filtration in one roll.

100 / 150 / 200 / 300 / 400 / 500 / 600 g/m²0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 mmBatch test reportExport packing
Composite Geomembrane produced by Hengyang

Representative photo of Composite Geomembrane; final surface, width and roll length are confirmed at order.

Specification

Standard range

StructureTwo fabric / one membrane, one fabric / one membrane, two fabric / two membrane
Fabric weight100 / 150 / 200 / 300 / 400 / 500 / 600 g/m²
Membrane thickness0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 mm
Common build-ups600g/1.5mm/600g; 500g/1.0mm/500g; 200g/0.5mm/200g
Width2-6 m
StandardGB/T 17642 (nonwoven composite geomembrane)
Peel strength≥ 60 N/cm
Puncture resistanceMore than twice a single-layer membrane of the same thickness

Typical production ranges for Composite Geomembrane; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Canals, reservoirs and ponds where lining and filtration are combined. The material package around Composite Geomembrane — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Composite Geomembrane

  • Canal and reservoir lining
  • Ponds with less-controlled subgrade
  • Slopes where separate fabric placement is difficult

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Composite Geomembrane compares

Composite membrane protects the liner during installation and adds filtration. A plain liner plus separate geotextile can be cheaper on large flat sites with good access; composite wins where handling and protection are critical.

Compare with my specification

Reference configuration

Jining mining subsidence reservoir — 2F1M composite geomembrane + eco bag slope protection. Reference configuration for Composite Geomembrane, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Membrane factory-bonded to one or two nonwoven fabrics, so no site lamination is needed.
  • 1F1M, 2F1M and 2F2M builds from 200 g/0.5 mm to 600 g/2.0 mm.
  • The fabric provides cushioning and filtration while the membrane does the sealing.
Application fit

Where Composite Geomembrane fits

A factory-bonded composite of geomembrane and nonwoven geotextile, combining seepage control with cushioning and filtration in one roll.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Confirm the fabric weight, membrane thickness and total roll weight
  2. Lay with the membrane edge exposed for double-track welding
  3. Keep fabric edges clean and dry before welding
  4. Stitch or overlap fabric edges as specified, then protect the surface

Welding parameters and seam records for Composite Geomembrane are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Composite Geomembrane

What does 600g/1.5mm/600g mean?

It means 600 g/m² geotextile on each face of a 1.5 mm membrane. Heavier fabric gives more puncture protection and tensile strength.

When is composite geomembrane better than a plain liner?

Composite membrane protects the liner during installation and service, and adds filtration. It is widely used for canals, reservoirs and ponds where site conditions are less controlled.

What does 600g/1.5mm/600g mean?

It describes 600 g/m² geotextile on each face of a 1.5 mm geomembrane. Heavier fabric gives more puncture protection and tensile strength.

Can it be welded?

The membrane edge is exposed for double-track thermal welding; fabric edges are stitched or overlapped according to the installation method statement.

Related

Related products and engineering packages

Other products in the composite range, plus the eight material systems used around Composite Geomembrane.

Two-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

Two-Fabric One-Membrane Composite Geomembrane

reservoir and canal lining with 600g/1.5mm/600g typical build-up

One-Fabric One-Membrane Composite GeomembraneComposite Geomembrane

One-Fabric One-Membrane Composite Geomembrane

channel lining and ponds where a lighter composite is specified

Waterproof Composite GeotextileComposite Geomembrane

Waterproof Composite Geotextile

basement and roof waterproofing with a bonded membrane core

Anti-Seepage Composite GeotextileComposite Geomembrane

Anti-Seepage Composite Geotextile

fish ponds, reservoirs and small dams needing a flexible seepage barrier

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Composite Geomembrane for a project?

Send the specification values, area, head and delivery port for Composite Geomembrane; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products