Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Products/Staple Fibre Geotextile

Staple Fibre Geotextile

A staple-fibre needle-punched geotextile for filtration, separation and protection where the design values can be met without filament cost.

100-600 g/m²1-6 mBatch test reportExport packing
Staple Fibre Geotextile produced by Hengyang

Representative photo of Staple Fibre Geotextile; final surface, width and roll length are confirmed at order.

Specification

Standard range

FibreStaple polyester (PET) or polypropylene (PP)
Mass per unit area100-600 g/m²
Width1-6 m
StandardGB/T 17638
FunctionsFiltration, separation, protection and cushioning

Typical production ranges for Staple Fibre Geotextile; project values are confirmed against the drawing and test report before shipment.

Request data sheet & quote

Classification and applications

Cost-effective filtration and separation in earthworks. The material package around Staple Fibre Geotextile — cushion geotextile, drainage, anchoring and welding — is selected with the same drawing.

Best fit for Staple Fibre Geotextile

  • General filtration and separation
  • Cushion under pond and canal liners
  • Drainage trench wrapping

What we need to quote

  • Thickness or mass per unit area, width and quantity
  • Project type, design head and chemical exposure
  • Standard or specification clauses, if any
  • Delivery port and required date
Comparison

How Staple Fibre Geotextile compares

Staple fibre costs less than filament but has lower tensile strength and creep resistance. It is a good fit for filtration and light protection, not for high-stress reinforcement.

Compare with my specification

Reference configuration

Yellow River Delta aquaculture pond renovation — 1.0 mm HDPE liner, 8 m width, 12 ponds. Reference configuration for Staple Fibre Geotextile, not a delivered project record.

Read before specifying

Typical build-ups using this material

Reference configurations, not delivered project records.

Material behaviour

Why this material is selected

  • Staple-fibre polyester or polypropylene, 100-600 g/m².
  • A cost-effective filtration, separation and protection layer for normal earthworks.
  • Width 1-6 m, supplied in rolls for direct deployment.
Application fit

Where Staple Fibre Geotextile fits

A staple-fibre needle-punched geotextile for filtration, separation and protection where the design values can be met without filament cost.

Final thickness, width and surface are confirmed against the drawing, design head and chemical exposure.

Installation

Installation steps and checks

  1. Check the specified mass, tensile and O95 values against the drawing
  2. Prepare a smooth subgrade and remove sharp objects
  3. Lap 300 mm minimum, or 500 mm in water and scour zones
  4. Protect exposed rolls from UV and wind uplift before covering

Welding parameters and seam records for Staple Fibre Geotextile are supplied with the shipment; for the first production welds, an engineer can attend site.

Questions buyers ask about Staple Fibre Geotextile

Where should staple fibre not be used?

Avoid it where the design relies on long-term tensile reinforcement, high puncture resistance or repeated load. Use filament or a geogrid for those duties.

Which gram weight do I need?

As a cushion under geomembrane, 500-600 g/m² is common; for drainage and filtration in normal earthworks 200-300 g/m² is usually sufficient. Check the design specification for tensile and permeability values.

Filament or staple fibre?

Filament geotextile has higher tensile strength and better durability for reinforcement and heavy civil work. Staple fibre is cost-effective for filtration, separation and protection layers.

Can it be used under HDPE liner?

Yes. A 500-600 g/m² nonwoven geotextile is typically placed between the prepared subgrade and the geomembrane to prevent puncture and to provide drainage.

Related

Related products and engineering packages

Other products in the geotextile range, plus the eight material systems used around Staple Fibre Geotextile.

Nonwoven GeotextileNonwoven Geotextile

Nonwoven Geotextile

filtration, separation and cushioning under geomembranes

Continuous Filament GeotextileNonwoven Geotextile

Continuous Filament Geotextile

reinforcement, heavy filtration and protection layers

Polyester GeotextileNonwoven Geotextile

Polyester Geotextile

filtration and drainage where polyester chemical resistance is needed

Polypropylene GeotextileNonwoven Geotextile

Polypropylene Geotextile

alkali and acid resistant filtration in industrial and coastal works

All eight material systems

Quote builder

Build a quote request in 30 seconds

Fill what you know. The button creates a structured email in your mail app; nothing is stored on this website.

Contact sales

Need Staple Fibre Geotextile for a project?

Send the specification values, area, head and delivery port for Staple Fibre Geotextile; we will confirm the standard and reply with a material schedule.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products