Factory-direct supply · GB standard · Export packingISO 9001 / ISO 14001 / ISO 45001
Home/Pricing

Price guide and quote process

Geosynthetics are priced by mass and specification, not by a single square-metre number. These are the variables that move a quote, and the information that lets us give a comparable one.

Six variables that move the price

VariableEffect on price
Resin and standardVirgin HDPE costs more than recycled or blended resin. A standard-compliant liner can be 20-30% above a non-compliant sheet of the same thickness.
ThicknessPrice scales with mass per square metre. Moving from 1.0 mm to 1.5 mm adds about 50% material.
Width and roll lengthWider rolls reduce seams and labour but may need special handling. Custom slit widths carry a setup cost.
Quantity and colourSmall orders carry setup and freight penalties. Black is standard; green, blue or white involve a minimum run.
Testing and documentsThird-party inspection, batch test reports and pre-fabrication add cost but make the quote comparable.
Packing, freight and dateExport packing, incoterm and urgent delivery all move the landed cost; compare quotes at the same incoterm.
Quote checklist

Send these five items

  • Product and thickness or mass per unit area
  • Total area and preferred roll width
  • Project type and design head
  • Standard or specification clause
  • Delivery port, incoterm and date
Comparing quotes?

Check the thickness, standard, resin statement and test report — not only the price per square metre. A cheaper sheet that fails stress cracking costs far more to replace.

Send a quote request

Three common quote traps

Thickness stated, standard omitted

“1.5 mm HDPE” is not a specification. Ask for the resin statement, density, tensile yield, carbon black and the test standard; otherwise two quotes may describe different materials.

Price per square metre, freight excluded

A low ex-works price can lose its advantage once packing, inland haulage and sea freight are added. Compare the same incoterm and the same roll width.

Sample tested, production not

A sample can be made from selected resin while production follows another batch. Require a batch test report and retained sample for the actual shipment.

Standard ranges

Typical specification ranges by product system

SystemTypical rangeStandard or basis
HDPE Geomembrane0.3 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mmGB/T 17643-2011; landfill liner per CJ/T 234-2006
Nonwoven Geotextile100-600 g/m²GB/T 17639-2023 for filament; GB/T 17638-2017 for staple fibre
Composite Geomembrane200-600 g/m² per sideGB/T 17642-2008
Bentonite Waterproof Blanket (GCL)4000-6000 g/m²JG/T 194; landfill use with CJ/T 234 reference
Composite Drainage Net5-10 mmGB/T 17643 / GB/T 17638 base materials
Ecological Bag40×60 cm, 45×75 cm, customUV-stabilised PP / PET woven fabric; project specification
Cement Blanket1-2 mManufacturer specification; project standard to be confirmed
Tunnel Waterproof Board1.0 / 1.2 / 1.5 / 2.0 mmGB/T 18173.1

Typical production ranges, not a quotation. Project values are confirmed against the drawing, test report and order.

From enquiry to shipment

1. Review

We check the specification, quantity and delivery requirement, and confirm whether a standard product or a custom run is needed.

2. Proposal

You receive a material schedule, standard basis, packing plan and price with a validity period.

3. Approval

Samples, test reports and pre-production details are confirmed before production is booked.

4. Shipment

Batch testing, labelling, container loading photos and documents are issued before departure.

FAQ

Price and quotation questions

Do you publish a price list?

No. Price depends on thickness, width, quantity, standard and freight. Send the five items above and we will quote against your specification.

Can I get a sample before ordering?

Yes. Standard samples can be couriered free; the buyer covers freight on larger sets.

Are your prices FOB or CIF?

Both are possible. Tell us the port and incoterm so the quote is comparable.

How buyers ask for a price

Common requests include “HDPE geomembrane price per m²”, “1.5 mm landfill liner CIF price”, “composite geomembrane 600g/1.5mm/600g quote”, “GCL price per roll” and “cement blanket price per m²”. A useful reply needs the thickness or mass, area, standard, packing, port and delivery date. Send those six items and the answer is comparable from the first reply.

Ready to price a project?

Send the drawing, area and delivery port. We will return a material schedule and a quote with the standard stated.

Call +86 400-150-1689 Send project details
Call sales WhatsApp Get quote Products