How the three polyethylene liners differ in strength, flexibility, chemical resistance and typical applications.
By the Hengyang technical team · Published 2026-11-21 · Reviewed against GB/T standards and batch test practice
High-density polyethylene gives the highest tensile strength and best long-term resistance to stress cracking. It is the standard choice for landfills, tailings and reservoirs where the liner must perform for decades.
Low-density polyethylene is softer and easier to shape around irregular details, but has lower strength and a narrower temperature window. It suits small ponds, temporary covers and detailing rather than large primary liners.
Linear low-density polyethylene offers better tear resistance and elongation than LDPE while keeping reasonable strength. It is used for settling ponds, agricultural storage and details where flexibility matters. Start with the design standard and the chemical exposure. If the project specifies HDPE, do not substitute LDPE to save cost; the failure mode is stress cracking after a few years, which is expensive to repair.
Basis and limits. This note is based on GB/T 17643-2011, GB/T 17642-2008, GB/T 17638-2017 and GB/T 18173.1, together with Hengyang batch test practice. It is general technical guidance, not a design for a specific project. Confirm thickness, layer build-up, welding parameters and acceptance criteria against the project drawing and specification.
Send the drawing and design head. We will check the proposed thickness, cushion and weld detail against the specification.
Ask an engineerDrawings, head, area and chemical exposure are enough for a first selection. We reply within one working day.