Hengyang manufactures HDPE geomembrane, geotextile, composite geomembrane, bentonite GCL, drainage net, eco bag, cement blanket and tunnel waterproof board. We supply landfills, reservoirs, biogas digesters, wastewater basins and tank farms, with material selection and welding support from first drawing to final test.
Width, standard, lines, testing, lead time and response can each be checked. The data comes from our own lines and QC laboratory.
A 10 m roll cuts seam length by about 30% compared with a 6 m roll on large cells, reducing leak points and labour.
GB/T 17643, GB/T 17642 and GB/T 17638 production, with density, tensile, puncture and permeability tested per batch.
Blown film, calendered HDPE, filament and staple nonwoven, GCL and drainage net lines, with no intermediate trading markup.
Tensile, puncture, permeability, UV, carbon black and OIT equipment in service, with third-party retesting supported.
Custom thickness, width, colour, cut length and pre-fabrication shorten secondary work on site.
Selection, welding parameters, closed-water testing and leak investigation handled within 24 hours.
Dezhou sits next to the 104 national road and Beijing–Shanghai expressway; nine regional offices ship locally.
Geomembrane, geotextile, composite membrane, GCL, drainage net, eco bag, cement blanket and waterproof board.
Each series has its own page with standard, thickness or mass range, applications and installation points.

Hengyang supplies smooth, textured and studded HDPE geomembranes in 0.3-3.0 mm thickness and widths up to 10 m.

Continuous filament and staple fibre needle-punched geotextiles from 100 to 600 g/m², used for filtration, separation, drainage and reinforcement under geomembranes and in earthworks.

Composite geomembrane bonds one or two nonwoven geotextile layers to an HDPE or LDPE membrane in a single roll, combining seepage control with cushioning and filtration.

Needle-punched sodium bentonite GCL for landfill caps, underground structures, ponds and artificial lakes.

Three-dimensional composite drainage net for landfill leachate collection, basement and roof drainage, tunnel and retaining wall drainage.

UV-stabilised woven geotextile bags filled with soil or aggregate for slope protection, riverbank revetment and vegetated retaining structures.

Flexible cementitious composite that hardens on hydration, used for canal lining, slope protection, ditch and pond lining where fast, low-logistics concrete placement is needed.

EVA, HDPE and hanger-type waterproof boards for tunnel secondary lining, basement and underground works.
Landfill, tailings, reservoir, biogas, wastewater, lake, tank farm, factory floor and riverbank each have their own guide page.

Composite liner and closure cap systems for sanitary landfills: HDPE geomembrane, GCL, geotextile cushion…
View application →
Double-liner containment for hazardous and industrial waste landfills, with primary and secondary HDPE me…
View application →
Lining and closure systems for tailings dams, red mud yards and industrial residue storage, engineered fo…
View application →
Flexible lining for plain reservoirs, irrigation storage, fire water ponds and artificial lakes, includin…
View application →
Black HDPE membrane covers and bottoms for biogas digesters, manure lagoons and covered anaerobic ponds, …
View application →
Seepage control for oxidation ponds, septic tanks, manure lagoons and agricultural wastewater storage, wi…
View application →
Chemical-resistant lining for industrial wastewater, equalisation basins, aeration tanks and sludge beds,…
View application →
Seepage control for landscape lakes, decorative ponds and ecological water features, balancing waterproof…
View application →
Secondary containment and impervious paving for fuel tank farms, chemical terminals and loading areas, in…
View application →
Impervious floors for workshops, chemical storage yards, truck washes and basement decks, combined with d…
View application →
Geotextile, eco bag and cement blanket systems for riverbanks, canals and shoreline protection, combining…
View application →
Sealing for coal ash yards, slag yards and industrial residue storage, designed for wind exposure, load a…
View application →Founded in Lingcheng, Dezhou in 2019 with registered capital of CNY 100 million. Blown-film, calendered, nonwoven, GCL and drainage lines produce to GB standards with batch test reports.
Factory in Lingcheng, Dezhou · 4:3
Founded on 16 May 2019 with registered capital of CNY 100 million, the company manufactures HDPE geomembrane, geotextile, composite geomembrane, tunnel waterproof board, drainage net, GCL, eco bag and cement blanket.
The site runs a 10 m blown-film line, a calendered HDPE line, high-speed and medium-speed nonwoven lines, a GCL line and a drainage net line. Membrane thickness 0.3–3.0 mm and geotextile 100–800 g/m² can be made to project requirements.
Products are used in landfills, tailings, reservoirs, biogas digesters, lagoons, wastewater basins, artificial lakes, tank farms, factory floors and riverbanks, with selection, anchoring, welding and leak-investigation support.
The plant is in Lingcheng Economic Development Zone, Dezhou; the lines, laboratory and warehouse can be visited.

On the 104 national road near the Beijing–Shanghai expressway and high-speed rail; trucks enter directly for loading.

Sales, samples and technical service are separated from production; visits can be arranged.

Finished rolls and containers staged for loading, with loading photos before departure.

Blown-film HDPE from 0.3 to 3.0 mm, single roll width up to 10 m.

Filament geotextile from 100 to 800 g/m², with online width and weight control.

Staple-fibre geotextile for filtration, separation and protection layers.

HDPE geonet core bonded to nonwoven geotextile for drainage and filtration.

Sodium bentonite GCL from 4000 to 6000 g/m², needle-punched or film-faced.
Certificate and report scans can be supplied for a project; the entity is Shandong Hengyang New Materials Co., Ltd.
Each profile shows location context, material build-up and the products used. These are reference configurations, not delivered project claims.
Typical build-up: 1.5 mm HDPE geomembrane + GCL + 600 g/m² geotextile + drainage net
Typical build-up: 1.0 mm HDPE liner, 8 m width, 12 ponds
Typical build-up: 2F1M composite geomembrane + eco bag slope protection
Typical build-up: 2.0 mm double-textured HDPE + geotextile + leak detection
Records published on tender platforms, newest first. The English page shows eight entries as a verification index; the Chinese page lists all 35 with source links.
Public tenderProject reference imageFujian · Fuzhou
Contract amount: Awarded
Public tenderProject reference imageHebei · Baoding
Contract amount: Awarded
Public tenderProject reference imageBeijing
Contract amount: CNY 924,300
Public tenderProject reference image
Public tenderProject reference imageInner Mongolia
Contract amount: Awarded
Public tenderProject reference imageNingxia · Wuzhong
Contract amount: CNY 11.16m (8 suppliers)
Public tenderProject reference imageBeijing
Contract amount: Awarded
Public tenderProject reference imageJiangxi · Nanchang
Contract amount: CNY 102,400
The factory is in Lingcheng Economic Development Zone, Dezhou, Shandong, about 1.5 hours by high-speed rail from Jinan. Visits and sample collection can be arranged on weekdays.
Yes. Standard samples of geomembrane, geotextile, GCL and drainage net can be couriered free of charge; the buyer covers freight on larger sample sets.
Small trial orders are accepted for standard specifications. Custom thickness, width and colour usually start at one production run, typically 1,000-3,000 m².
Yes. We provide welding parameters, seam testing guidance and installation checklists, and can arrange an engineer to attend the site for critical projects.
Geomembrane to GB/T 17643-2011, composite geomembrane to GB/T 17642-2008, geotextile to GB/T 17638-2017, waterproof board to GB/T 18173.1. Project-specific standards can be quoted.
Notes based on site practice and GB requirements, written to be used directly on a project.
A practical method for selecting 0.5-2.0 mm HDPE liner thickness from head, subgrade, service life and constru…
How the three polyethylene liners differ in strength, flexibility, chemical resistance and typical application…
Double-track thermal welding parameters, T-joint treatment and the air/vacuum tests that decide whether a line…
A comparison for landfill caps, ponds and underground works, including hydration, space and protection require…
Data sheets, packing lists, certificates of origin and customs documents are prepared in English; the same batch records apply in every market.
Drawings, head, area and chemical exposure are enough for a first selection. We reply within one working day.