Five variables that move HDPE liner quotations, and three quotation traps buyers should check.
By the Hengyang technical team · Published 2026-11-21 · Reviewed against GB/T standards and batch test practice
Virgin HDPE costs more than recycled blends. A 1.5 mm standard-compliant liner can cost 30% more than a recycled liner of the same thickness, and the difference shows up in stress-crack resistance.
Price scales with mass, so thickness is the biggest driver. Wider rolls reduce seams and labour, but may not suit small sites or manual handling.
Small orders carry setup and freight penalties. Third-party testing, special colour, pre-fabrication and short delivery windows all add cost. Be careful with quotes that omit test reports, quote a lower thickness than specified, or price per square metre without stating the standard and resin. Compare the technical basis, not just the number.
Basis and limits. This note is based on GB/T 17643-2011, GB/T 17642-2008, GB/T 17638-2017 and GB/T 18173.1, together with Hengyang batch test practice. It is general technical guidance, not a design for a specific project. Confirm thickness, layer build-up, welding parameters and acceptance criteria against the project drawing and specification.
Send the drawing and design head. We will check the proposed thickness, cushion and weld detail against the specification.
Ask an engineerDrawings, head, area and chemical exposure are enough for a first selection. We reply within one working day.